Chimney Services in Bronx, NY 10451

How Does Ageless Chimney Carry Out Chimney Liner Installation Process In Bronx, NY?

The chimney structure must be as secure as possible to ensure a long life. Chimney liner installation is one of the best ways to secure your chimney. In this article, you will know the chimney liner installation process.

What Is A Chimney Liner?

Baychester, NY

A chimney liner is a tube placed inside a fireplace cap designed to absorb all the combustion products and move them out to the environment. The chimney liner helps in keeping your chimney running safely and pleasantly.

The chimney liner helps maintain your chimney by preventing improper heat transfer. Without the chimney liner, there are high chances of catching fire.

It also prevents the design of the fireplace cap from damages due to the combustion product. Additionally, using the correct liner layout improves the effectiveness of any device you’re using in the chimney.

Chimney Liner Installation Process Used By Ageless Chimney

Ageless Chimney in Bronx, NY has a team of chimney service professionals near me who have been serving various chimney-associated services in Bronx County.

We know that the chimney liner installation and repairs are not easy, and it’s a complicated process that requires extensive effort. However, we have simplified the chimney liner installation process with small and easy steps. It’s best to hire experts for this challenging task.

1. Review Your Chimney

The first step is to review the chimney rain cap thoroughly. We use a flashlight to look at its top to find restrictions or bends that could hinder pulling the liner through.

2. Appropriate Diameter Liner & Measurements

The next step is to determine the proper diameter of the liner you utilize. We can ask the manufacturer whether you own an open fireplace or wood stove.

3. Buy A Chimney Liner

We buy an appropriate liner based on the measurements and specifications. Many options are available for the liner, but we use the flexible steel liner. The liner comes in an entire kit that includes everything one needs to complete the installation and replacement.

4. Flatten The Liner & Apply Insulation

The liner is flat on a surface level. We connect the connector at the bottom to the top of the liner. We then attach a hose clamp to the connector using an adjustable wrench. We either use an insulation blanket or pour-in insulation; if the gap between the chimney and liner is two or more inches.

5. Use Of Spray Adhesive, A Hose Clamp, & Foil Tape

Spray adhesive attaches an insulation layer to the liner, working up into 12′ segments. We use foil tape to seal seams. We repeat this process until the liner is fully covered and we use wire mesh in the kit and wrap it around the liner.

Below the connector, we utilize a hose clamp to secure the mesh. We pull the mesh to the top of the chimney rain cap. After that, we use a second clamp to hold it in place.

6. Attach Rope & Get On The Boat

We know the procedure to pull your particular liner up the chimney; it varies based on the brand and manufacturer, and we are familiar with the instruction manual. Generally, the rope comes along with the kit. Finally, we connect it to the cone for pulling or the lower connector.

One person sits on the roof near the chimney and lets another person assist with feeding the liner. We throw the rope down the chimney so that the other person can catch it. We’ll then have to put ourselves near the chimney’s bottom within the interior.

7. Seal The Chimney Crown

We hold the liner and cover the chimney with silicone caulking. We install a clamp on the liner with a tight fit and tap con screws into the holes drilled. We put the plate on top of the liner and then push it down into the caulking to make an effective seal.

We make sure to secure the tee’s snout and body using the metal attached and wrap it around the back of the tee body. We ensure that the remaining insulation covers the connection. Finally, we connect the tee snout to the heater to complete the installation process.

Hire Professional Chimney Liner Installers For Chimney Liner Installation

It is possible to fall and hurt yourself while trying to install a chimney liner by yourself. A mistake could cost you thousands of dollars for chimney damage.

If you are from Bronx, NY, and looking for chimney services near me, hire Ageless Chimney today.

We’ve served Bronx County for many years and provide professional chimney cleaning services near me. Hiring Ageless Chimney for Bronx County regions is a cost-effective strategy for chimney repairs, installation, and replacements.

Contact us today at 516-613-5450 or visit at Ageless Chimney in Bronx, NY to get your chimney liner installation process started.


Some information about Bronx, NY

The Bronx is a borough of New York City, coextensive with Bronx County, in the U.S. state of New York. It is south of Westchester County; north and east of the New York City borough of Manhattan, across the Harlem River; and north of the New York City borough of Queens, across the East River. The Bronx has a land area of 42 square miles (109 km2) and a population of 1,472,654 in the 2020 census. If each borough were ranked as a city, the Bronx would rank as the ninth-most-populous in the U.S. Of the five boroughs, it has the fourth-largest area, fourth-highest population, and third-highest population density. It is the only borough of New York City not primarily on an island. With a population that is 54.8% Hispanic as of 2020, it is the only majority-Hispanic county in the Northeastern United States and the fourth-most-populous nationwide.

European colonization of the Bronx began in 1639. The Bronx was originally part of Westchester County, but it was ceded to New York County in two major parts (West Bronx, 1874 and East Bronx, 1895) before it became Bronx County. Originally, the area was part of the Lenape’s Lenapehoking territory inhabited by Siwanoy of the Wappinger Confederacy. Over time, European colonists converted the borough into farmlands.

The development of the Bronx is directly connected to its strategic location between New England and New York (Manhattan). Control over the bridges across the Harlem River plagued the period of British colonial rule. The King’s Bridge, built in 1693 where Broadway reached the Spuyten Duyvil Creek, was a possession of Frederick Philipse, lord of Philipse Manor. The tolls were resented by local farmers on both sides of the creek, and in 1759, Jacobus Dyckman and Benjamin Palmer led them in building a free bridge across the Harlem River. After the American Revolutionary War, the King’s Bridge toll was abolished.

The territory now contained within Bronx County was originally part of Westchester County, one of the 12 original counties of the English Province of New York. The present Bronx County was contained in the town of Westchester and parts of the towns in Yonkers, Eastchester, and Pelham. In 1846, a new town was created by division of Westchester, called West Farms. The town of Morrisania was created, in turn, from West Farms in 1855. In 1873, the town of Kingsbridge was established within the former borders of the town of Yonkers, roughly corresponding to the modern Bronx neighborhoods of Kingsbridge, Riverdale, and Woodlawn Heights, and included Woodlawn Cemetery.

Learn more about Bronx.

Map of Bronx, NY


Here are some chimney-related links:

← Previous Service LocationNext Service Location →