Ageless Chimney

CHIMNEY CLEANING: A DO IT YOURSELF APPROACH in Bellmore, NY

New York's Most Trusted Chimney Installations & Repairs

See What our Customers Are Saying

Maintaining your chimneys in Bellmore, NY is very important. To have your chimney swept professionally, call Ageless Chimney. In preparation for the cleaning process, there are a few things you can do. In fact, you can keep your chimney clean by doing some simple things! Keep reading for a step-by-step at-home chimney cleaning guide.
long island chimney service
long island chimney service
  1. Prepare the Area Around Your Chimney

First thing’s first. You should remove anything that is in front of your Bellmore, NY fireplace. Also, move any furniture as far away as possible. If you don’t want anything getting dirty, make sure you cover everything with old sheets. You should also roll back any rugs that are near the fireplace. If you have carpeting, it would be wise to set down a tarp.

  1. Remove the Grate from the Fireplace

This may go without saying, but do not operate an open flame in the area surrounding the fireplace while attempting to do any chimney cleaning in Nassau County. Be sure to wear a dust mask and protective gloves while you attempt to clean the fireplace. While being mindful not to inhale any dust or soot, shovel out ashes and debris from the inside of the fireplace.

  1. Inspect Your Chimney

Use a torch, (carefully!) to look up the flue of the chimney. If there is a damper fitted to your flue, you will need to ensure it is open. If there is, use the damper handle to push the flap back and lock it open. Check for any animals or birds that may have taken up residence in your Nassau County chimney. Inspect for any cracks or missing firebricks and take remedial steps if the damage is found. The lining of your flue is important to prevent gas or smoke from escaping. Check the thickness of any creosote build-up using a blade or scraper. If you notice significant damage, it may be time to get some professional chimney cleaning company, or even chimney repair, with Ageless Chimney.



  1. Select Your Brush


By now you should have determined the size and shape of your Nassau County chimney flue. It will be either square or round. You should also estimate the height of your chimney. Once you choose the correct brush, attach it to a rod. Push the rod up the flue until the bottom end of the rod is in the middle of the fireplace.

fireplace repair new york city
fireplace repair brooklyn
    1. Scrub, Scrub, Scrub!

    Start scrubbing up your chimney by going through the hole in your dust sheet or cardboard, attach another rod to lengthen your chimney brush. Scrub using a slight clockwise movement as you push, and never twist the brush counterclockwise. With a hard and vigorous thrust, scrub the flue with the brush, adding more rods as you proceed up the flue.

    1. Remove Brush and Soot

    You will know that you have reached the top of your chimney when you feel less friction. Withdraw the brush unscrewing one rod at a time. As you unscrew the last rod, let the brush fall into the soot pile that now lies at the bottom of the fireplace. Lift the bottom of the dust sheet or cardboard covering, remove the brush and carefully shovel the pile of soot into a metal bucket.

    1. Cleaning Up


    The first thing you should do is remove any dust cloths or cardboard that may have been assembled. It is now time to get the vacuum or shop vacuum out and clean up all that soot! To complete the project, you will need to assemble the fireplace’s grate once more. If you used an old sheet, you should take it outside and shake it off. As soot is non-toxic and environmentally friendly, it can be buried as a means of disposal. Hard deposits of creosote are corrosive and more toxic, however, they can be buried too. Any edible plants in your garden will not absorb creosote, and when you eat the fruit or vegetables they produce, they will not contain the chemicals present in creosote.

Call Us Today

long island chimney repair

Getting your chimney swept and inspected improves the quality of the air in your home, keeps your loved ones safe from toxins, and reduces your home’s fire risk. Ageless Chimney takes pride in providing the safest, most cost-effective cleaning procedures. Call us today at 516-795-1313!

Bellmore is a hamlet and census-designated place (CDP) in Nassau County, New York, United States. The population according to the 2010 census was 16,218. Bellmore is located on the south shore of Long Island 5 miles from Jones Beach State Park, approximately 27 miles (43 km) east of Manhattan, and 10 miles (16 km) east of the Nassau-Queens Line.

In 1643, Bellmore was a farming and fishing town known then as “Little Neck and “New Bridge”. Bellmore was settled primarily by Englishmen who crossed Long Island Sound from Connecticut in the middle of the seventeenth century. Ryan Marr purchased a 214-acre (0.9 km2) farm in what is now North Bellmore in 1655. Further south, near the bay, John Smith deeded 100 acres (0.4 km2) to his son, Jeremiah in 1676. John Bedell married Sarah Southard and moved into their new home on Merrick Road in about 1689. Two communities grew out of these beginnings. Smithville (later Smithville South) was named for the many Smith families who lived in the area, and New Bridge, named for the bridge that joined the peninsulas south of Merrick Road.

When the railroad was built through the area in 1867 they arbitrarily named their station Bellmore. Development followed as both communities grew towards the railroad and adopted the name Bellmore. By 1920, the Bellmores had a population of 3000 as well as stores along Bedford Avenue. The town was officially named Bellmore in 1900, when the post office was established.

The Bellmore Memorial Library, was founded in 1948. It was started in an old schoolhouse. This library has lasted since 1948 until present, keeping it as the main library of Bellmore, New York.

Learn more about Bellmore.

Contact Us

Book A Call