CHIMNEY CLEANING: A DO IT YOURSELF APPROACH in Calverton, NY
New York's Most Trusted Chimney Installations & Repairs
See What our Customers Are Saying
- Prepare the Area Around Your Chimney
First thing’s first. You should remove anything that is in front of your Calverton, NY fireplace. Also, move any furniture as far away as possible. If you don’t want anything getting dirty, make sure you cover everything with old sheets. You should also roll back any rugs that are near the fireplace. If you have carpeting, it would be wise to set down a tarp.
- Remove the Grate from the Fireplace
This may go without saying, but do not operate an open flame in the area surrounding the fireplace while attempting to do any chimney cleaning in Suffolk County. Be sure to wear a dust mask and protective gloves while you attempt to clean the fireplace. While being mindful not to inhale any dust or soot, shovel out ashes and debris from the inside of the fireplace.
- Inspect Your Chimney
Use a torch, (carefully!) to look up the flue of the chimney. If there is a damper fitted to your flue, you will need to ensure it is open. If there is, use the damper handle to push the flap back and lock it open. Check for any animals or birds that may have taken up residence in your Suffolk County chimney. Inspect for any cracks or missing firebricks and take remedial steps if the damage is found. The lining of your flue is important to prevent gas or smoke from escaping. Check the thickness of any creosote build-up using a blade or scraper. If you notice significant damage, it may be time to get some professional chimney cleaning company, or even chimney repair, with Ageless Chimney.
Select Your Brush
By now you should have determined the size and shape of your Suffolk County chimney flue. It will be either square or round. You should also estimate the height of your chimney. Once you choose the correct brush, attach it to a rod. Push the rod up the flue until the bottom end of the rod is in the middle of the fireplace.
-
- Scrub, Scrub, Scrub!
Start scrubbing up your chimney by going through the hole in your dust sheet or cardboard, attach another rod to lengthen your chimney brush. Scrub using a slight clockwise movement as you push, and never twist the brush counterclockwise. With a hard and vigorous thrust, scrub the flue with the brush, adding more rods as you proceed up the flue.
- Remove Brush and Soot
You will know that you have reached the top of your chimney when you feel less friction. Withdraw the brush unscrewing one rod at a time. As you unscrew the last rod, let the brush fall into the soot pile that now lies at the bottom of the fireplace. Lift the bottom of the dust sheet or cardboard covering, remove the brush and carefully shovel the pile of soot into a metal bucket.
- Cleaning Up
The first thing you should do is remove any dust cloths or cardboard that may have been assembled. It is now time to get the vacuum or shop vacuum out and clean up all that soot! To complete the project, you will need to assemble the fireplace’s grate once more. If you used an old sheet, you should take it outside and shake it off. As soot is non-toxic and environmentally friendly, it can be buried as a means of disposal. Hard deposits of creosote are corrosive and more toxic, however, they can be buried too. Any edible plants in your garden will not absorb creosote, and when you eat the fruit or vegetables they produce, they will not contain the chemicals present in creosote.
Call Us Today
Getting your chimney swept and inspected improves the quality of the air in your home, keeps your loved ones safe from toxins, and reduces your home’s fire risk. Ageless Chimney takes pride in providing the safest, most cost-effective cleaning procedures. Call us today at 516-795-1313!
Calverton is a hamlet and census-designated place (CDP) on eastern Long Island in Suffolk County, New York, United States. The population was 6,510 at the 2010 census.
Calverton was first referred to as “Baiting Hollow Station” when the Long Island Rail Road arrived in 1844. The station closed in 1958, but the sheltered shed for the station remained standing as of 2007.
The area’s Native American name was Conungum or Kanungum, meaning “fixed line” or “boundary”. In 1868, the Calverton post office opened, named for Bernard J. Calvert. It remained a small farming community specializing in cranberries, which grew in swampy areas along the Peconic River until the Navy purchase.
Calverton’s history is tied closely to Naval Weapons Industrial Reserve Plant, Calverton. In 1953, the United States Navy purchased 6,000 acres (24 km2) around Calverton from a local farmer named Harry Edwards, including the mansion of a grandson of Frank Winfield Woolworth’s, so that Grumman could test and finish jets. A 10,000-foot (3,000 m) runway was built, and most of Grumman’s F-14 Tomcat and E-2C Hawkeye aircraft were to pass through the plant.
Learn more about Calverton.