Chimney Company in Coram, NY 11727

CHIMNEY CLEANING: A DO IT YOURSELF APPROACH

Maintaining your chimneys in Coram, NY is very important. To have your chimney swept professionally, call Ageless Chimney. In preparation for the cleaning process, there are a few things you can do. In fact, you can keep your chimney clean by doing some simple things! Keep reading for a step-by-step at-home chimney cleaning guide.

  1. Prepare the Area Around Your Chimney

First thing’s first. You should remove anything that is in front of your Coram, NY fireplace. Also, move any furniture as far away as possible. If you don’t want anything getting dirty, make sure you cover everything with old sheets. You should also roll back any rugs that are near the fireplace. If you have carpeting, it would be wise to set down a tarp.

  1. Remove the Grate from the Fireplace

This may go without saying, but do not operate an open flame in the area surrounding the fireplace while attempting to do any chimney cleaning in Suffolk County. Be sure to wear a dust mask and protective gloves while you attempt to clean the fireplace. While being mindful not to inhale any dust or soot, shovel out ashes and debris from the inside of the fireplace.

Chimney Cleaning Services in Coram, NY

  1. Inspect Your Chimney

Use a torch, (carefully!) to look up the flue of the chimney. If there is a damper fitted to your flue, you will need to ensure it is open. If there is, use the damper handle to push the flap back and lock it open. Check for any animals or birds that may have taken up residence in your Suffolk County chimney. Inspect for any cracks or missing firebricks and take remedial steps if the damage is found. The lining of your flue is important to prevent gas or smoke from escaping. Check the thickness of any creosote build-up using a blade or scraper. If you notice significant damage, it may be time to get some professional chimney cleaning company, or even chimney repair, with Ageless Chimney.

  1. Select Your Brush

By now you should have determined the size and shape of your Suffolk County chimney flue. It will be either square or round. You should also estimate the height of your chimney. Once you choose the correct brush, attach it to a rod. Push the rod up the flue until the bottom end of the rod is in the middle of the fireplace.

  1. Scrub, Scrub, Scrub!

Start scrubbing up your chimney by going through the hole in your dust sheet or cardboard, attach another rod to lengthen your chimney brush. Scrub using a slight clockwise movement as you push, and never twist the brush counterclockwise. With a hard and vigorous thrust, scrub the flue with the brush, adding more rods as you proceed up the flue.

  1. Remove Brush and Soot

You will know that you have reached the top of your chimney when you feel less friction. Withdraw the brush unscrewing one rod at a time. As you unscrew the last rod, let the brush fall into the soot pile that now lies at the bottom of the fireplace. Lift the bottom of the dust sheet or cardboard covering, remove the brush and carefully shovel the pile of soot into a metal bucket.

  1. Cleaning Up

The first thing you should do is remove any dust cloths or cardboard that may have been assembled. It is now time to get the vacuum or shop vacuum out and clean up all that soot! To complete the project, you will need to assemble the fireplace’s grate once more. If you used an old sheet, you should take it outside and shake it off. As soot is non-toxic and environmentally friendly, it can be buried as a means of disposal. Hard deposits of creosote are corrosive and more toxic, however, they can be buried too. Any edible plants in your garden will not absorb creosote, and when you eat the fruit or vegetables they produce, they will not contain the chemicals present in creosote.

Even though this is a very basic guide to cleaning a chimney, we strongly recommend you call the Ageless Chimney in Coram, NY! We will save you a lot of time and effort for you. Don’t trust just any chimney company, call us today 516-613-5450!


Some information about Coram, NY

Coram is a hamlet and census-designated place in the town of Brookhaven, Suffolk County, Long Island, New York, in the United States. As of the 2010 United States census, the CDP population was 39,113.

Coram is the oldest settlement in the central part of the town of Brookhaven. Its early name was ‘Wincoram’, perhaps the name of a Native American who lived in the area as late as 1703. The first European settler in the area was likely William Satterly, who sought permission to open a tavern to cater to travelers in 1677.

The NRHP-listed Lester H. Davis House on the northeast corner of Mount Sinai-Coram and Middle Country Roads.

During the American Revolutionary War, Benjamin Tallmadge with his contingent of Light Dragoons arrived and he with 12 Culper Ring men captured and burned 300 tons of hay the British were storing for winter to feed their horses. George Washington, on hearing the news, sent the following letter to Tallmadge:I have received with much pleasure the report of your successful enterprise upon fort St. George, and was pleased with the destruction of the hay at Coram, which must be severely felt by the enemy at this time. I beg you to accept my thanks for your spirited execution of this business. Annually Coram celebrates the event in October.

From 1784 to 1885, Coram served as the meeting place for the Town of Brookhaven government, using the Davis Town Meeting House for much of that period. The Davis House, built in the 1750s, was placed on the National Register of Historic Places in 2001 and is the oldest existing structure in Coram.

Learn more about Coram.

Directions from Coram, NY to Ageless Chimney


Here are some chimney-related links:

← Previous Service LocationNext Service Location →